
Specifications |
EIB 192 |
EIB 192 F |
EIB 192 M |
Input |
|||
Incremental signals |
1 VPP |
||
Reference mark |
One or distance-coded1) |
||
Input frequency |
≤ 400 kHz |
||
Electrical connection |
M23 connector, 12-pin |
||
Cable length |
≤ 6 m |
||
Output |
|||
Absolute position values |
EnDat 2.2 |
Fanuc Serial Interface |
Mitsubishi High Speed |
Order designation |
EnDat 22 |
Fanuc 02 |
Mit 02-4 / Mit 02-24) |
Electrical connection |
M12, 8-pin |
M23, 17-pin |
M23, 17-pin |
Cable length |
≤ 100 m2) |
≤ 20 m3) |
≤ 20 m3) |
Interpolation |
≤ 16 384-fold (depending on the encoder) |
||
Power supply |
5 V ± 5% measured at EIB |
||
Current consumption |
≤ 160 mA (without load, without encoder) |
||
Operating temperature Storage temperature |
0 °C to 70 °C –30 °C to 70 °C |
||
Vibration 55 to 2000 Hz |
100 m/s2 (IEC 60 068-2-6) |
||
Degree of protection |
IP 65 |
||
Weight |
Approx. 0.3 kg |
||
1) Note: For distance-coded reference marks, no direction reversals are permitted during referencing (scanning of two neighboring reference marks) 2) with HEIDENHAIN cable; supply voltage of 5 V ± 5% at the EIB must be maintained 3) with HEIDENHAIN cable; IEncoder ≤ 150 mA; greater cable lengths upon request 4) Mitsu01 upon request |