ERO 6180

    Specifications

    Scanning head

    AK ERO 6180

    Interface

    1 VPP

    Reference mark signal

    Square-wave pulse

    Cutoff frequency –3 dB

    200 kHz

    Electrical connection

    Cable 3 m with D-sub connector (male, 15-pin)

    Cable length

    30 m

    Voltage supply

    5 V DC ± 0.25 V

    Current requirement

    < 100 mA (without load)

    Vibration 55 to 2 000 Hz

    Shock 11 ms

    200 m/s2 (EN 60 068-2-6)

    400 m/s2 (EN 60 068-2-27)

    Operating temperature

    0 °C to 50 °C

    Weight Scanning head

    (approx.) Connector

    Cable

    6 g (without cable)

    32 g

    22 g/m

    Graduated disk

    TKN ERO 6100

    Measuring standard

    Chromium graduation on glass

    Signal periods

    4 096

    Accuracy of graduation

    ± 10”

    Position error per signal period1)

    ± 5”

    Reference marks

    One

    Hub inside diameter

    41 mm

    Circular scale outside diameter

    70 mm

    Mech. permissible speed

    3 500 min-1

    Moment of inertia

    50 x 10-6 kgm2

    Permissible axial motion

    0.1 mm

    Protection EN 60 529

    IP 00

    Weight (approx.)

    71 g

    1) The position error within one signal period and the accuracy of the graduation result together in the encoder-specific error; for additional error through mounting and the bearing of the measured shaft, see Measuring accuracy